Anubis stencil evaluation

Judge any Anubis reference before it becomes a stencil

Anubis designs live or die on jackal silhouette and ornament restraint. Check the ear plus snout construction, the eye anchor, the profile versus frontal versus full-body fit and the collar density at your exact height, then prepare a clean stencil that transfers as one readable guardian.

Built for working artists preparing Anubis pieces. This page covers Anubis evaluation and stencil preparation only, not tattoo application or healing advice. Profile, frontal, bust and full-body options are judged here as different constructions inside one jackal-silhouette framework.

Run the Anubis check Set exact height

What makes an Anubis stencil-viable

Silhouette, eye anchor, and ornament restraint decide the result.

An Anubis is a jackal head with ranked Egyptian ornament. These three pillars predict whether that head survives reduction, print, and transfer.

Jackal snout and ear silhouette

An Anubis reads first as a long narrow snout between two tall pointed ears. Stencil viability comes from one unbroken outer contour for ears plus muzzle with open skin between ear bases and along both sides of the snout, not from inner nose or fur detail a photo shows.

Check: Cover all inner muzzle and ear detail. If the head still reads as jackal from ears plus snout alone, the silhouette is sound and inner marks are support. If ears merge into the skull or the snout shortens into a dog nose, the outer contour needs repair before anything else changes.

Eye anchor and gaze read

The eye sets the head direction and keeps a stylized jackal from sliding into a generic canine. When the eye keeps open skin around it and a clear brow or kohl line above it, the profile or frontal direction survives reduction. Lid doubling, lash rows and inner glints close first and should be judged as removable.

Check: Count the marks inside the eye zone at the target height. One eye shape plus one brow or kohl line should carry a profile head, and a symmetric eye pair plus one brow line should carry a frontal head. If lid lines touch the eye, that contact needs reopening or removal.

Headdress, collar and jewelry hierarchy

The nemes stripes, wesekh collar, ankh, Eye of Horus and staff read through two or three primary bands, not through every bead, feather barb or hieroglyph a reference shows. Secondary ornament competes with snout and eye separations for the same room, so it thins first.

Check: Name the snout contour, the ear pair and the eye anchor that set the first read. If removing one collar row, one hieroglyph cluster or one staff band changes nothing about that read, that mark is support and can go before touching jackal mass.

Anubis evaluation framework

Score the reference in minutes, then act on the weakest check.

Four Anubis constructions at labeled heights. Each one names the protected structure, the fix, and the go or no-go verdict at that exact size. Diagrams are educational and shown near relative size on screen. Confirm with a measured 1:1 print.

HOLDS AT STATED SIZE

Jackal-head profile bust at 14 cm

Intended height 140 mm

140 mm
Source
Side-view jackal head with a long straight snout, two tall ears with open skin between bases, one almond eye with a single kohl line, and a two-band wesekh collar with no staff or pyramid field.
Protect
Outer ear contours on both ears, the full snout top and jaw lines with open skin on both sides, the eye plus kohl spacing, and the outer collar band that sets bust width.
Fix
Shorten only the shorter inner collar band if two bead rows touch at 1:1. Keep ear height, snout length and eye clearance unchanged.
Candidate stencil
Same Anubis with ear plus snout separation kept, eye anchor cleared, collar rows ranked, and protected jackal contours held at transferable mass.
Final-size verdict
Holds at 14 cm after a collar-row check. Both ears stay separated, the snout keeps its length from a normal viewing distance, and the eye reads as the single direction anchor.

REOPEN SNOUT AND EYE GAPS

Frontal symmetric jackal at 12 cm

Intended height 120 mm

120 mm
Source
Direct-face jackal with symmetric ears, an eye pair with kohl lines, a centered muzzle with nose and mouth hints, and a striped nemes edge behind the ears. Strong presence, but one eye touches its kohl line and the muzzle sides share one merged edge with cheek fur.
Protect
Ear pair height and separation, the eye pair positions, the center nose position, and the outer nemes edge on both sides.
Fix
Reopen the eye-to-kohl gap and the muzzle-to-cheek channel until each runs as open skin at true size, then confirm symmetry still holds. Remove cheek fur ticks before changing ear or snout mass.
Candidate stencil
Same Anubis with ear plus snout separation kept, eye anchor cleared, collar rows ranked, and protected jackal contours held at transferable mass.
Final-size verdict
Holds at 12 cm once both gaps stay open at true size. Frontal authority comes from symmetric ears plus a separated eye pair, not from fur ticks or extra lid lines.

RANK ORNAMENT LAST

Standing full-body Anubis at 15 cm

Intended height 150 mm

150 mm
Source
Full jackal-headed figure in stride with a profile head, broad collar, kilt with belt lines, a was staff in one hand and an ankh in the other, plus a small pyramid and sun disc field behind the legs.
Protect
Head direction set by snout plus eye, torso and striding leg axis, staff and ankh positions as single bands, and the collar outer band.
Fix
Reduce the background field to one pyramid edge or remove it, keep two kilt lines maximum with open skin between them, and hold staff and ankh as single contours. Do not keep bead rows, kilt pleats and background glyphs together at this height.
Candidate stencil
Same Anubis with ear plus snout separation kept, eye anchor cleared, collar rows ranked, and protected jackal contours held at transferable mass.
Final-size verdict
Holds at 15 cm once ornament is ranked below figure mass. Stride posture carries the guardian read while collar, kilt and background field stay subordinate at 1:1.

ENLARGE OR RECROP

Fine-line dense jackal emblem at 6 cm

Intended height 60 mm

60 mm, fragile
Source
Delicate outline-only jackal head with hairline ear contours, a thin snout pair, small eye with doubled lids, a beaded collar with four narrow rows and tiny ankh plus feather marks, attractive on screen but drawn with almost no line mass and six competing ornament bands.
Protect
Ear positions and the snout direction that give the head its jackal read.
Fix
Enlarge past the point where every ear gap, eye clearance and collar separation transfers as open skin, or recrop to the head with one collar band and no background marks. Do not keep four bead rows plus lid doubling plus small glyphs together at 6 cm.
Candidate stencil
Same Anubis with ear plus snout separation kept, eye anchor cleared, collar rows ranked, and protected jackal contours held at transferable mass.
Final-size verdict
At 6 cm the ears, lids and beads function as one band and the eye prints as a broken scratch. Enlarge, recrop to head plus one band, or choose a bolder construction for this height.

Medusa snake-crown construction stays on the Medusa owner. Mythical-creature comparison stays on the fantasy collection. Broad visual browsing stays on the stencils and subject hubs. This framework exists to judge Anubis jackal silhouette, eye-anchor construction and collar hierarchy at a stated height, not to replace those owners.

Ears, eyes, and ornament at final size

Judge the white space at the height you will print.

Screens forgive crowding that paper and skin do not. Set the height first, then inspect each feature below at true physical size with scaling off.

About 6 cm and below

Wrist and ankle accents, behind-ear marks, finger panels and small gap fillers.

Carry a recrop only, such as a profile snout with one ear pair or a frontal head with one collar band. Keep one contour family and two separations maximum. If an ear gap, eye clearance or collar channel closes at 1:1, enlarge or reselect rather than forcing reduction.

About 8 to 14 cm

Common forearm, calf, shoulder and thigh Anubis pieces.

The most flexible band. A profile or frontal jackal bust with ranked collar bands can work when every gap is verified at true size. Check ear separation, eye count, snout channels and collar crossings before approving ornament.

About 14 cm and above

Large thigh panels, back pieces, chest and full sleeve sections.

Room for a full-body stride with staff, ankh and one background mark, but only when open skin separates ears, eyes, snout sides and each ornament band. Larger height does not rescue a merged eye, touching ears or a beaded collar cap.

Anubis feature checks by height band
FeatureAbout 6 cm and belowAbout 8 cm and above
Snout, ear and muzzle separationsKeep the heaviest lines on the outer ear contours and the snout top plus jaw. If an outer ear edge disappears, the head loses its jackal read and becomes a plain canine wedge.Same priority. Larger height allows slightly finer inner muzzle lines, but separability still beats uniform thinness.
Eyes, kohl lines and nose marksEach eye must read as a separate mark with open skin around it plus clearance to its kohl line. Merge means a bolder eye or a larger height, not thinner lids.Kohl wings and nose modeling can carry more shape when each mark keeps its own spacing at 1:1. Check the full head with a squint test at true size.
Collar, nemes and jewelry bandsCarry at most one collar or nemes band with visible skin between beads or stripes. Repeated bead rows and fine stripe hatching merge first at small heights.Additional bands and light bead hints can work when each band keeps its own channel and open skin. Ornament should never join the snout or close an eye gap.
Body, kilt, staff and background fieldKeep no staff, ankh, kilt pleats or background field. Figure and background lines compete with ear and snout gaps for the same room and should be recropped away.One staff or ankh band plus one background edge can add narrative when the head clearly dominates. Equal-weight double background fields need hierarchy work before print.

Line-weight guide

Compare fine, normal and bold behavior on the same stencil before changing ear or snout line mass.

Density diagnostic

Use the final-size density check when ears, eyes, collar bands and background marks compete for the same room.

Gap diagnostic

Follow one closing ear gap or eye contact when a single separation is the blocker.

Reference to clean stencil

Build from the jackal head outward, then rank the ornament.

Work in this order so one change at a time can be judged at the same height. Stop when ears, snout, eyes and collar each read correctly.

  1. 01

    Lock height, placement and composition first

    Set the intended physical height in millimeters, name the body area, and choose profile bust, frontal head or full-body stride before judging the reference. A frontal jackal that holds at 15 cm on a thigh can fail at 6 cm on a wrist with no line being wrong on its own. Use the size calculator when target dimensions are still open.

  2. 02

    Verify head direction and ornament hierarchy

    Confirm the profile or frontal direction fits the intent, then rank the composition: ears plus snout first, eye anchor second, collar and background last. Resolve ear contacts, eye touches and equal-weight ornament bands before touching line weight. A jackal with separated ears and one clear eye anchor is already halfway to stencil-ready.

  3. 03

    Set jackal versus ornament roles

    Assign every mark a role: lead structure that carries the first read, support that shapes it, and ornament that can be removed. Strengthen outer ear and snout contours first, keep collar and nemes bands lighter, and mark one removable bead row or background mark that can go if gaps close.

  4. 04

    Simplify ears, eyes and ornament at 1:1

    Reduce collar rows, lid lines and background marks before thinning contours. Keep open skin between ear bases, around each eye, along both snout sides and between ornament bands, and run a squint check: step back until fine beads disappear and confirm the jackal head still reads. The line-weight guide covers fine, normal and bold behavior on the same stencil.

  5. 05

    Verify print and transfer path

    Export a true-size PDF with no fit-to-page scaling, inspect the narrowest ear gap, the eye plus kohl clearance and the smallest collar cluster on plain paper, then measure the physical print with a ruler. If the digital file passes and only paper fails, move to print-stage evidence instead of simplifying again.

Placement and composition decisions

Jackal heads want skin that protects ear height

An Anubis is a tall-eared head with a long snout, or a vertical striding figure. Placements with a clear flat span preserve ear height, while narrow limbs demand a profile run or a recrop.

Thigh and back

Broad flat fields where a frontal head with symmetric ears or a full-body stride can spread without wrapping. The width is the asset, so ear tips and staff length need spacing checks rather than compression.

Check: Center the eye anchor on the flattest span, mirror the ear pair, and verify tip and collar spacing at 1:1 before print.

Outer forearm and calf

Long narrow fields where the head should follow the limb axis. Wide symmetric nemes edges and broad collars wrap fast and crowd ear tips.

Check: Choose a profile bust with the snout pointing along the limb for these fields, align the head axis with the limb, and shorten cross-limb collar bands while edits are still cheap.

Chest and shoulder

Large curved panels with room for a bust with collar or a striding figure. The curve compresses one ear side of wide frontal heads in photos and transfers.

Check: Center the lead eye on the flattest span, let support ornament fall toward the slope, and keep collar bands to two maximum.

Wrist, ankle, hand and behind ear

Small wrapped fields where only a recrop survives. Full strides with staff, ankh and background forced into these bands merge first.

Check: Recrop to a profile snout with ears, or one frontal head with a single collar band, then run the small-size checks at the exact height.

Stencil-ready checklist

Approve the Anubis only when every line passes

Run this short sequence with scaling off and a ruler in hand. One failed line means fix, enlarge, or reselect before transfer.

  • Confirm intended height in millimeters, the named placement, and the profile, frontal or full-body choice.
  • Confirm an ear pair with open skin between bases plus open snout channels at 1:1.
  • Confirm each eye reads as a separate mark with clearance to its kohl or brow line.
  • Confirm collar, nemes and jewelry stay countable with no merged bead band.
  • Confirm staff, kilt and background lines total one or zero at small heights with no merged parallel channels.
  • Export a true-size PDF with scaling off and measure the physical print.

Print preflight

Inspect fine ear separations and eye plus kohl pairs at the intended height before blaming the printer.

Exact height and true-size PDF

Set physical dimensions and calibration so the 1:1 check measures what the stencil will be.

Paper choice

Match the media family to the production method after the file passes.

Body-fit preview

Check ear height and snout direction on curved areas while edits are still cheap.

Separated ears plus snout first Verify gaps at 1:1 Countable ornament only

FAQ

Anubis stencil decisions, answered

Short answers for the head direction, style, line-weight, and placement checks that recur when an Anubis reference moves toward transfer-ready output.

It is usable when three checks pass at the exact physical height: the ear pair and snout keep open skin channels at 1:1, each eye reads as a separate mark with clearance to its kohl or brow line, and collar plus background ornament reads as separate bands rather than one merged cap. If any check fails, the fix list on this page names what to simplify, reopen, or enlarge before print.

Next steps

Use the neighboring owners for adjacent jobs.

This guide covers Anubis head-direction checks, height-tied ear and eye density plus collar gap rules, composition-size decisions, and reference-to-stencil preparation. Use the links below for related jobs such as sizing, print checks, paper, and placement.

Exact size and true-size PDF

Set physical height, calibration, and page layout for the evaluated Anubis.

Continue

Finished-file preflight

Check fine ear separations and eye plus kohl pairs at the intended height.

Continue

Photo to stencil path

Start from an Anubis photo when the reference itself still needs conversion into stencil-ready linework.

Continue

Multi-image boards

Organize several Anubis directions into one source board when the composition is still open.

Continue

Body-fit preview

Preview ear height and snout direction on a real body photo while edits are still cheap.

Continue

Placement reasoning

Read the placement logic behind curved-area compensation.

Continue

Paper selection

Choose the media family after the production method is known.

Continue

People collection

Use the people hub for full-figure posture and stride separation depth beyond Anubis iconography.

Continue

Fantasy collection

Use the fantasy hub for creature silhouette comparison outside Egyptian jackal construction.

Continue

Browse collections

Return to broad visual browsing once the Anubis construction is decided.

Continue

Browse subjects

Compare one motif across several stencil decisions in the subject directory.

Continue

Create a stencil draft

Start from the evaluated reference once the go decision is made.

Continue

Board organization, grid overlays, photo-quality scoring, generic conversion, broad gallery browsing, paper manufacturing detail, and placement mechanics stay in their specialist owners. The links above hand off instead of repeating that detail.

From evaluated reference to working stencil

Turn the approved Anubis into a stencil draft.

Start from the Anubis that passed the ear, snout, and gap checks, then continue on iPhone for body fit, exact-size print, mirror and professional export.

Download on theApp Store
Create a stencil draft